Memcached¶

Memcached is an entirely memory-based cache server, originally developed to handle high loads at LiveJournal.com and subsequently open-sourced by Danga Interactive. It is used by sites such as Facebook and Wikipedia to reduce database access and dramatically increase site performance.

Memcached runs as a daemon and is allotted a specified amount of RAM. All it does is provide a fast interface for adding, retrieving and deleting data in the cache. All data is stored directly in memory, so there’s no overhead of database or filesystem usage.

After installing Memcached itself, you’ll need to install a Memcached binding. There are several Python Memcached bindings available; the two supported by Django are pylibmc and pymemcache.

To use Memcached with Django:

• Set BACKEND to django.core.cache.backends.memcached.PyMemcacheCache or django.core.cache.backends.memcached.PyLibMCCache (depending on your chosen memcached binding)
• Set LOCATION to ip:port values, where ip is the IP address of the Memcached daemon and port is the port on which Memcached is running, or to a unix:path value, where path is the path to a Memcached Unix socket file.

In this example, Memcached is running on localhost (127.0.0.1) port 11211, using the pymemcache binding:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
        "LOCATION": "127.0.0.1:11211",
    }
}

In this example, Memcached is available through a local Unix socket file /tmp/memcached.sock using the pymemcache binding:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
        "LOCATION": "unix:/tmp/memcached.sock",
    }
}

One excellent feature of Memcached is its ability to share a cache over multiple servers. This means you can run Memcached daemons on multiple machines, and the program will treat the group of machines as a single cache, without the need to duplicate cache values on each machine. To take advantage of this feature, include all server addresses in LOCATION, either as a semicolon or comma delimited string, or as a list.

In this example, the cache is shared over Memcached instances running on IP address 172.19.26.240 and 172.19.26.242, both on port 11211:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
        "LOCATION": [
            "172.19.26.240:11211",
            "172.19.26.242:11211",
        ],
    }
}

In the following example, the cache is shared over Memcached instances running on the IP addresses 172.19.26.240 (port 11211), 172.19.26.242 (port 11212), and 172.19.26.244 (port 11213):

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
        "LOCATION": [
            "172.19.26.240:11211",
            "172.19.26.242:11212",
            "172.19.26.244:11213",
        ],
    }
}

By default, the PyMemcacheCache backend sets the following options (you can override them in your OPTIONS):

"OPTIONS": {
    "allow_unicode_keys": True,
    "default_noreply": False,
    "serde": pymemcache.serde.pickle_serde,
}

A final point about Memcached is that memory-based caching has a disadvantage: because the cached data is stored in memory, the data will be lost if your server crashes. Clearly, memory isn’t intended for permanent data storage, so don’t rely on memory-based caching as your only data storage. Without a doubt, none of the Django caching backends should be used for permanent storage – they’re all intended to be solutions for caching, not storage – but we point this out here because memory-based caching is particularly temporary.

Redis¶

Redis is an in-memory database that can be used for caching. To begin you’ll need a Redis server running either locally or on a remote machine.

After setting up the Redis server, you’ll need to install Python bindings for Redis. redis-py is the binding supported natively by Django. Installing the hiredis-py package is also recommended.

To use Redis as your cache backend with Django:

• Set BACKEND to django.core.cache.backends.redis.RedisCache.
• Set LOCATION to the URL pointing to your Redis instance, using the appropriate scheme. See the redis-py docs for details on the available schemes.

For example, if Redis is running on localhost (127.0.0.1) port 6379:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.redis.RedisCache",
        "LOCATION": "redis://127.0.0.1:6379",
    }
}

Often Redis servers are protected with authentication. In order to supply a username and password, add them in the LOCATION along with the URL:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.redis.RedisCache",
        "LOCATION": "redis://username:password@127.0.0.1:6379",
    }
}

If you have multiple Redis servers set up in the replication mode, you can specify the servers either as a semicolon or comma delimited string, or as a list. While using multiple servers, write operations are performed on the first server (leader). Read operations are performed on the other servers (replicas) chosen at random:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.redis.RedisCache",
        "LOCATION": [
            "redis://127.0.0.1:6379",  # leader
            "redis://127.0.0.1:6378",  # read-replica 1
            "redis://127.0.0.1:6377",  # read-replica 2
        ],
    }
}

Database caching¶

Django can store its cached data in your database. This works best if you’ve got a fast, well-indexed database server.

To use a database table as your cache backend:

• Set BACKEND to django.core.cache.backends.db.DatabaseCache
• Set LOCATION to tablename, the name of the database table. This name can be whatever you want, as long as it’s a valid table name that’s not already being used in your database.

In this example, the cache table’s name is my_cache_table:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.db.DatabaseCache",
        "LOCATION": "my_cache_table",
    }
}

Unlike other cache backends, the database cache does not support automatic culling of expired entries at the database level. Instead, expired cache entries are culled each time add(), set(), or touch() is called.

python manage.py createcachetable

class CacheRouter:
    """A router to control all database cache operations"""

    def db_for_read(self, model, **hints):
        "All cache read operations go to the replica"
        if model._meta.app_label == "django_cache":
            return "cache_replica"
        return None

    def db_for_write(self, model, **hints):
        "All cache write operations go to primary"
        if model._meta.app_label == "django_cache":
            return "cache_primary"
        return None

    def allow_migrate(self, db, app_label, model_name=None, **hints):
        "Only install the cache model on primary"
        if app_label == "django_cache":
            return db == "cache_primary"
        return None

Filesystem caching¶

The file-based backend serializes and stores each cache value as a separate file. To use this backend set BACKEND to "django.core.cache.backends.filebased.FileBasedCache" and LOCATION to a suitable directory. For example, to store cached data in /var/tmp/django_cache, use this setting:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
        "LOCATION": "/var/tmp/django_cache",
    }
}

If you’re on Windows, put the drive letter at the beginning of the path, like this:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
        "LOCATION": "c:/foo/bar",
    }
}

The directory path should be absolute – that is, it should start at the root of your filesystem. It doesn’t matter whether you put a slash at the end of the setting.

Make sure the directory pointed-to by this setting either exists and is readable and writable, or that it can be created by the system user under which your web server runs. Continuing the above example, if your server runs as the user apache, make sure the directory /var/tmp/django_cache exists and is readable and writable by the user apache, or that it can be created by the user apache.

Local-memory caching¶

This is the default cache if another is not specified in your settings file. If you want the speed advantages of in-memory caching but don’t have the capability of running Memcached, consider the local-memory cache backend. This cache is per-process (see below) and thread-safe. To use it, set BACKEND to "django.core.cache.backends.locmem.LocMemCache". For example:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.locmem.LocMemCache",
        "LOCATION": "unique-snowflake",
    }
}

The cache LOCATION is used to identify individual memory stores. If you only have one locmem cache, you can omit the LOCATION; however, if you have more than one local memory cache, you will need to assign a name to at least one of them in order to keep them separate.

The cache uses a least-recently-used (LRU) culling strategy.

Note that each process will have its own private cache instance, which means no cross-process caching is possible. This also means the local memory cache isn’t particularly memory-efficient, so it’s probably not a good choice for production environments. It’s nice for development.

Dummy caching (for development)¶

Finally, Django comes with a “dummy” cache that doesn’t actually cache – it just implements the cache interface without doing anything.

This is useful if you have a production site that uses heavy-duty caching in various places but a development/test environment where you don’t want to cache and don’t want to have to change your code to special-case the latter. To activate dummy caching, set BACKEND like so:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.dummy.DummyCache",
    }
}

Using a custom cache backend¶

While Django includes support for a number of cache backends out-of-the-box, sometimes you might want to use a customized cache backend. To use an external cache backend with Django, use the Python import path as the BACKEND of the CACHES setting, like so:

CACHES = {
    "default": {
        "BACKEND": "path.to.backend",
    }
}

If you’re building your own backend, you can use the standard cache backends as reference implementations. You’ll find the code in the django/core/cache/backends/ directory of the Django source.

Note: Without a really compelling reason, such as a host that doesn’t support them, you should stick to the cache backends included with Django. They’ve been well-tested and are well-documented.

Cache arguments¶

Each cache backend can be given additional arguments to control caching behavior. These arguments are provided as additional keys in the CACHES setting. Valid arguments are as follows:

• TIMEOUT: The default timeout, in seconds, to use for the cache. This argument defaults to 300 seconds (5 minutes). You can set TIMEOUT to None so that, by default, cache keys never expire. A value of 0 causes keys to immediately expire (effectively “don’t cache”).

• OPTIONS: Any options that should be passed to the cache backend. The list of valid options will vary with each backend, and cache backends backed by a third-party library will pass their options directly to the underlying cache library.

  Cache backends that implement their own culling strategy (i.e., the locmem, filesystem and database backends) will honor the following options:

  • MAX_ENTRIES: The maximum number of entries allowed in the cache before old values are deleted. This argument defaults to 300.

  • CULL_FREQUENCY: The fraction of entries that are culled when MAX_ENTRIES is reached. The actual ratio is 1 / CULL_FREQUENCY, so set CULL_FREQUENCY to 2 to cull half the entries when MAX_ENTRIES is reached. This argument should be an integer and defaults to 3.

    A value of 0 for CULL_FREQUENCY means that the entire cache will be dumped when MAX_ENTRIES is reached. On some backends (database in particular) this makes culling much faster at the expense of more cache misses.

  The Memcached and Redis backends pass the contents of OPTIONS as keyword arguments to the client constructors, allowing for more advanced control of client behavior. For example usage, see below.

• KEY_PREFIX: A string that will be automatically included (prepended by default) to all cache keys used by the Django server.

  See the cache documentation for more information.

• VERSION: The default version number for cache keys generated by the Django server.

  See the cache documentation for more information.

• KEY_FUNCTION A string containing a dotted path to a function that defines how to compose a prefix, version and key into a final cache key.

  See the cache documentation for more information.

In this example, a filesystem backend is being configured with a timeout of 60 seconds, and a maximum capacity of 1000 items:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
        "LOCATION": "/var/tmp/django_cache",
        "TIMEOUT": 60,
        "OPTIONS": {"MAX_ENTRIES": 1000},
    }
}

Here’s an example configuration for a pylibmc based backend that enables the binary protocol, SASL authentication, and the ketama behavior mode:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyLibMCCache",
        "LOCATION": "127.0.0.1:11211",
        "OPTIONS": {
            "binary": True,
            "username": "user",
            "password": "pass",
            "behaviors": {
                "ketama": True,
            },
        },
    }
}

Here’s an example configuration for a pymemcache based backend that enables client pooling (which may improve performance by keeping clients connected), treats memcache/network errors as cache misses, and sets the TCP_NODELAY flag on the connection’s socket:

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
        "LOCATION": "127.0.0.1:11211",
        "OPTIONS": {
            "no_delay": True,
            "ignore_exc": True,
            "max_pool_size": 4,
            "use_pooling": True,
        },
    }
}

Here’s an example configuration for a redis based backend that selects database 10 (by default Redis ships with 16 logical databases), specifies a parser class (redis.connection.HiredisParser will be used by default if the hiredis-py package is installed), and sets a custom connection pool class (redis.ConnectionPool is used by default):

CACHES = {
    "default": {
        "BACKEND": "django.core.cache.backends.redis.RedisCache",
        "LOCATION": "redis://127.0.0.1:6379",
        "OPTIONS": {
            "db": "10",
            "parser_class": "redis.connection.PythonParser",
            "pool_class": "redis.BlockingConnectionPool",
        },
    }
}

Specifying per-view cache in the URLconf¶

The examples in the previous section have hard-coded the fact that the view is cached, because cache_page alters the my_view function in place. This approach couples your view to the cache system, which is not ideal for several reasons. For instance, you might want to reuse the view functions on another, cache-less site, or you might want to distribute the views to people who might want to use them without being cached. The solution to these problems is to specify the per-view cache in the URLconf rather than next to the view functions themselves.

You can do so by wrapping the view function with cache_page when you refer to it in the URLconf. Here’s the old URLconf from earlier:

urlpatterns = [
    path("foo/<int:code>/", my_view),
]

Here’s the same thing, with my_view wrapped in cache_page:

from django.views.decorators.cache import cache_page

urlpatterns = [
    path("foo/<int:code>/", cache_page(60 * 15)(my_view)),
]

캐시에 접근하기¶

django.core.cache.caches¶

You can access the caches configured in the CACHES setting through a dict-like object: django.core.cache.caches. Repeated requests for the same alias in the same thread will return the same object.

>>> from django.core.cache import caches
>>> cache1 = caches['myalias']
>>> cache2 = caches['myalias']
>>> cache1 is cache2
True

If the named key does not exist, InvalidCacheBackendError will be raised.

To provide thread-safety, a different instance of the cache backend will be returned for each thread.

django.core.cache.cache¶

As a shortcut, the default cache is available as django.core.cache.cache:

>>> from django.core.cache import cache

This object is equivalent to caches['default'].

기본 사용법¶

The basic interface is:

cache.set(key, value, timeout=DEFAULT_TIMEOUT, version=None)¶

>>> cache.set('my_key', 'hello, world!', 30)

cache.get(key, default=None, version=None)¶

>>> cache.get('my_key')
'hello, world!'

key should be a str, and value can be any picklable Python object.

The timeout argument is optional and defaults to the timeout argument of the appropriate backend in the CACHES setting (explained above). It’s the number of seconds the value should be stored in the cache. Passing in None for timeout will cache the value forever. A timeout of 0 won’t cache the value.

If the object doesn’t exist in the cache, cache.get() returns None:

>>> # Wait 30 seconds for 'my_key' to expire...
>>> cache.get("my_key")
None

If you need to determine whether the object exists in the cache and you have stored a literal value None, use a sentinel object as the default:

>>> sentinel = object()
>>> cache.get("my_key", sentinel) is sentinel
False
>>> # Wait 30 seconds for 'my_key' to expire...
>>> cache.get("my_key", sentinel) is sentinel
True

cache.get() can take a default argument. This specifies which value to return if the object doesn’t exist in the cache:

>>> cache.get("my_key", "has expired")
'has expired'

cache.add(key, value, timeout=DEFAULT_TIMEOUT, version=None)¶

To add a key only if it doesn’t already exist, use the add() method. It takes the same parameters as set(), but it will not attempt to update the cache if the key specified is already present:

>>> cache.set("add_key", "Initial value")
>>> cache.add("add_key", "New value")
>>> cache.get("add_key")
'Initial value'

If you need to know whether add() stored a value in the cache, you can check the return value. It will return True if the value was stored, False otherwise.

cache.get_or_set(key, default, timeout=DEFAULT_TIMEOUT, version=None)¶

If you want to get a key’s value or set a value if the key isn’t in the cache, there is the get_or_set() method. It takes the same parameters as get() but the default is set as the new cache value for that key, rather than returned:

>>> cache.get("my_new_key")  # returns None
>>> cache.get_or_set("my_new_key", "my new value", 100)
'my new value'

You can also pass any callable as a default value:

>>> import datetime
>>> cache.get_or_set("some-timestamp-key", datetime.datetime.now)
datetime.datetime(2014, 12, 11, 0, 15, 49, 457920)

cache.get_many(keys, version=None)¶

There’s also a get_many() interface that only hits the cache once. get_many() returns a dictionary with all the keys you asked for that actually exist in the cache (and haven’t expired):

>>> cache.set("a", 1)
>>> cache.set("b", 2)
>>> cache.set("c", 3)
>>> cache.get_many(["a", "b", "c"])
{'a': 1, 'b': 2, 'c': 3}

cache.set_many(dict, timeout)¶

To set multiple values more efficiently, use set_many() to pass a dictionary of key-value pairs:

>>> cache.set_many({"a": 1, "b": 2, "c": 3})
>>> cache.get_many(["a", "b", "c"])
{'a': 1, 'b': 2, 'c': 3}

Like cache.set(), set_many() takes an optional timeout parameter.

On supported backends (memcached), set_many() returns a list of keys that failed to be inserted.

cache.delete(key, version=None)¶

You can delete keys explicitly with delete() to clear the cache for a particular object:

>>> cache.delete("a")
True

delete() returns True if the key was successfully deleted, False otherwise.

cache.delete_many(keys, version=None)¶

If you want to clear a bunch of keys at once, delete_many() can take a list of keys to be cleared:

>>> cache.delete_many(["a", "b", "c"])

cache.clear()¶

Finally, if you want to delete all the keys in the cache, use cache.clear(). Be careful with this; clear() will remove everything from the cache, not just the keys set by your application. :

>>> cache.clear()

cache.touch(key, timeout=DEFAULT_TIMEOUT, version=None)¶

cache.touch() sets a new expiration for a key. For example, to update a key to expire 10 seconds from now:

>>> cache.touch("a", 10)
True

Like other methods, the timeout argument is optional and defaults to the TIMEOUT option of the appropriate backend in the CACHES setting.

touch() returns True if the key was successfully touched, False otherwise.

cache.incr(key, delta=1, version=None)¶

cache.decr(key, delta=1, version=None)¶

You can also increment or decrement a key that already exists using the incr() or decr() methods, respectively. By default, the existing cache value will be incremented or decremented by 1. Other increment/decrement values can be specified by providing an argument to the increment/decrement call. A ValueError will be raised if you attempt to increment or decrement a nonexistent cache key:

>>> cache.set("num", 1)
>>> cache.incr("num")
2
>>> cache.incr("num", 10)
12
>>> cache.decr("num")
11
>>> cache.decr("num", 5)
6

cache.close()¶

You can close the connection to your cache with close() if implemented by the cache backend.

>>> cache.close()

Cache key prefixing¶

If you are sharing a cache instance between servers, or between your production and development environments, it’s possible for data cached by one server to be used by another server. If the format of cached data is different between servers, this can lead to some very hard to diagnose problems.

To prevent this, Django provides the ability to prefix all cache keys used by a server. When a particular cache key is saved or retrieved, Django will automatically prefix the cache key with the value of the KEY_PREFIX cache setting.

By ensuring each Django instance has a different KEY_PREFIX, you can ensure that there will be no collisions in cache values.

Cache versioning¶

When you change running code that uses cached values, you may need to purge any existing cached values. The easiest way to do this is to flush the entire cache, but this can lead to the loss of cache values that are still valid and useful.

Django provides a better way to target individual cache values. Django’s cache framework has a system-wide version identifier, specified using the VERSION cache setting. The value of this setting is automatically combined with the cache prefix and the user-provided cache key to obtain the final cache key.

By default, any key request will automatically include the site default cache key version. However, the primitive cache functions all include a version argument, so you can specify a particular cache key version to set or get. For example:

>>> # Set version 2 of a cache key
>>> cache.set("my_key", "hello world!", version=2)
>>> # Get the default version (assuming version=1)
>>> cache.get("my_key")
None
>>> # Get version 2 of the same key
>>> cache.get("my_key", version=2)
'hello world!'

The version of a specific key can be incremented and decremented using the incr_version() and decr_version() methods. This enables specific keys to be bumped to a new version, leaving other keys unaffected. Continuing our previous example:

>>> # Increment the version of 'my_key'
>>> cache.incr_version("my_key")
>>> # The default version still isn't available
>>> cache.get("my_key")
None
# Version 2 isn't available, either
>>> cache.get("my_key", version=2)
None
>>> # But version 3 *is* available
>>> cache.get("my_key", version=3)
'hello world!'

Cache key transformation¶

As described in the previous two sections, the cache key provided by a user is not used verbatim – it is combined with the cache prefix and key version to provide a final cache key. By default, the three parts are joined using colons to produce a final string:

def make_key(key, key_prefix, version):
    return "%s:%s:%s" % (key_prefix, version, key)

If you want to combine the parts in different ways, or apply other processing to the final key (e.g., taking a hash digest of the key parts), you can provide a custom key function.

The KEY_FUNCTION cache setting specifies a dotted-path to a function matching the prototype of make_key() above. If provided, this custom key function will be used instead of the default key combining function.

Cache key warnings¶

Memcached, the most commonly-used production cache backend, does not allow cache keys longer than 250 characters or containing whitespace or control characters, and using such keys will cause an exception. To encourage cache-portable code and minimize unpleasant surprises, the other built-in cache backends issue a warning (django.core.cache.backends.base.CacheKeyWarning) if a key is used that would cause an error on memcached.

If you are using a production backend that can accept a wider range of keys (a custom backend, or one of the non-memcached built-in backends), and want to use this wider range without warnings, you can silence CacheKeyWarning with this code in the management module of one of your INSTALLED_APPS:

import warnings

from django.core.cache import CacheKeyWarning

warnings.simplefilter("ignore", CacheKeyWarning)

If you want to instead provide custom key validation logic for one of the built-in backends, you can subclass it, override just the validate_key method, and follow the instructions for using a custom cache backend. For instance, to do this for the locmem backend, put this code in a module:

from django.core.cache.backends.locmem import LocMemCache


class CustomLocMemCache(LocMemCache):
    def validate_key(self, key):
        """Custom validation, raising exceptions or warnings as needed."""
        ...

…and use the dotted Python path to this class in the BACKEND portion of your CACHES setting.